彩煌 Saiko_series 001 義山 - Giyaman 【現品販売】95000jpy
彩煌 Saiko series 001
義山- Giyaman
【現品販売】 95,000jpy
.
付属品:Drip-bag hanger峰乃櫓、アルミ収納缶、レザーポーチ、森乃雫ポケット付きクロス(ユニチカ製)、ロゴステッカー(65mm)、千社色札、取説、専用化粧箱。
.
[彩煌シリーズ説明]
彩煌(Saiko、Akira)を冠としたシリーズ作品です。
彩煌/Saiko とは 〝最高〟との意味に加えて森乃雫の考案、特許取得、外装加工プロセス考案した製作者の名前 〝旭: あきら〟を掛けたシリーズ名となっており、以下4項目を基軸として施された作品です。
.
1)形状は少し水路を短くして太注ぎ水流タイプに加工してます。
2)トップカバー半分をスケルトン仕様、反対側は柄を施す面となります。
3)Art_seriesのスケルトン仕様では前部の遮蔽爪(出過ぎるお湯を堰き止めて流れを緩やかにする機能)も除去してデザイン優先にする関係上、お湯が出過ぎるので前方アーチ状になりますが、この彩煌シリーズでは遮蔽爪を残してますので 注ぎ加減は変わらず、柔らかく優しい注ぎ水流となってます。
4)アンダーボディとスケルトンエリアは波状ウネリ柄の鏡面仕上げが基本です。
これは 優雅さを兼ね備えるために柄部以外は鏡面にする事で作品が完成してます。
※チタニュウムは非常に硬い素材となってますので、波状ウネリ柄を鏡面に仕上げるのはシンプルでありながら、通常の湾曲面の鏡面仕様と比較して 施工時間は3、4倍要します。
.
[作品内容]
記念すべき第一作目となる この作品への絵柄は三分割にした明るいステンドグラス風にまとめて見ました。
スケルトンエリアは前方遮蔽爪を残しカバー中央部まで内部を露出させ、後方給水部からも一水路を露出させて、残した部分は大きなウネリを施した。
.
[商品の命名として]
ステンドグラスに見立てた柄から、江戸時代よりカットガラス(切子)をギヤマンと呼ばれてましたが、和名として〝義山〟が用いられてたことから、義山-Giyamanと命名。
.
「このシリーズを設けた思い」
〝アートシリーズ〟では基本ベースに囚われる事なく湧き上がったイメージを、新たな研削方法で探りながら地紋を彫り進めて仕上げるので多岐にわたる新たな方法は得られるが、繰り返し同テーマで製作することが少なく 練度を高めるに至っていない。
この彩煌シリーズを最上位にする事で、キャンパスを狭くし一刻一刻に集中させ 最上級の作品を作り出す。
.
彩煌 Saiko series 001
義山- Giyaman
【Actual item sales】 95,000jpy
.
Accessories: Drip-bag hanger Mineno Yagura, aluminum storage can, leather pouch, Morino Shizuku cloth with pocket (manufactured by Unitika), logo sticker (65mm), Sensha color tag, instruction manual, vanity case.
.
[Saikou Series Overview]
This is a series of works bearing the name Saikou.
Saikou means "the best," but it can also be read as the name of 〝Akira〟, the creator who invented, patented, and developed Mori noshizuku exterior processing technology. These elements are collectively used as the title. The works are based on the following four pillars:
1) The water channel has been shortened slightly to create a thick pouring flow.
2) Half of the top cover is skeletonized, and the other side is the surface where the pattern will be applied.
3) With the Art_series skeletonized design, the front shielding claw (which blocks excess hot water and slows the flow) has been removed to prioritize design, resulting in an arched front due to the excessive hot water flow. However, with the Saikō series, the shielding claw remains, so the pouring speed remains the same, resulting in a soft, gentle pour.
4) The underbody and skeleton parts are basically mirror-finished with an engraved wave pattern.
By mirror-finishing everything except the patterned parts, it creates a luxurious feel.
*Titanium is a very hard material, so while it is simple to finish the wavy undulation pattern to a mirror finish, it takes 3 to 4 times longer to install than with a normal curved mirror finish.
.
[Artwork Details]
For this commemorative first piece, I divided the design into three sections in a bright stained-glass style.
The skeleton area exposes the interior up to the center of the cover, leaving the front shielding claws intact. I also exposed a water channel from the rear water supply section, and created a large undulating effect in the remaining area.
.
[Origin of the product name]
Kiriko has been called "Giyaman" since the Edo period due to its stained glass-like pattern, and was recorded under the Japanese name "義山" so this piece was named "義山 Giyaman."
.
[My motivation for creating this series]
In the "Art Series," I explore new grinding methods and carve patterns as images arise without being bound by a basic base, which allows for a wide range of new methods, but I rarely create works on the same theme repeatedly, which has not allowed me to improve my craftsmanship.
By making this Saikou Series the top of the line, I can narrow the canvas and focus on every moment, creating the finest works.
.
商品情報
サイズ: W45mm / H27mm / D16mm
重 量: 8.5g
※手加工の為、サイズや重量は若干誤差はあります。
※アウトドアでのドリップポット代用商品となりますので、ポットのように大きく変化する挙動をした場合、マグからお湯が溢れ出ますので、ご利用時はゆっくりと動かすようにして下さい。また取扱説明にも記載しておりますが、ご使用前に注ぎ口を水で濡らしてから使用して下さい。表面張力および毛管力を利用しておりますので、マグからの吸水力が増し柔らかく注げます。
About returns
We carefully check the shipped products (pouring state, magnet embedded state, state of each part), but if there is any damage, we apologize for the inconvenience, but please return it by payment. I will. In addition, even if you do not like the individual for reasons other than damage, we will not accept returns, so please take a closer look at the photos before purchasing. (Please contact us if you have any requests such as shooting directions not shown in the posted photos.)
* Please check the display based on the specified commercial transaction.
Polished products (Polish & Matte / Polish) are not completely mirror-finished, so small scratches due to abrasives and some residual stacking marks are not a problem.
Since the material is molded by 3D printing, the waterway and internal wall surface cannot be polished due to the structure, so only grinding is required.
The product introduction photo of the anodic oxide film type is for reference only. Please note that the same thing cannot be made due to the construction method.
Shipping information
・It will be delivered by "Click Post" with free shipping within Japan.
・For multiple items, courier service (Kuroneko Yamato)
・We cannot accept the designation of the delivery company.
*Japan Post e-packet
*For shipping to other countries, please contact us by email.
(rappo_kyoto@icloud.com)
To overseas customers
Available countries: We will add more countries after receiving inquiries.
*Please check the customs rules of your country.
method of payment
Credit card payment (lump sum / revolving)
Paypal payment
発送時期について
This item is sold as is.
